Focus on consumables

All of the Robit® button bits are manufactured of new 100% recyclable steel. In the environmentally friendly steel production process the CO² emissions have been reduced 80% and 95% of the waste is recycled including the process smoke which is filtered. The new steel grade gives even more uniform properties and improved fatigue strength which is crucial in rock drilling process. Designed for particular applications from soft rock formations to extremely hard conditions.

Models:
• A, AR – medium and hard rock model
• B, BR – hard + abrasive rock model
• DS, DSR – drop center model for straighter holes
• M – soft and medium hard rock model
• S, SR – all around model

Designed for fast and straight drilling of cut holes
• Dome reamers where integrated pilot with reamer
• Composed of pilot adapter or chicel and reaming bit

Produced from the carefully selected hollow drill steels, drill rods provide the advantages of the maximum strength with long thread life.
• Hexagonal Drifter Rods, Single & Tandem Thread Rods, Male-Female Rods
• Available with most types of threads

With specially developed alloys, shanks are with optimum hardenability and balance of core and case properties to offer extended wear and fatigue life.
• Compatible with most types of drills in the market

Produced for optimum energy transfer on various drilling diameter.
• Coupling Sleeve, Coupling Adapter, Bit Adapter
• Available with semi-bridge or full-bridge

Single-use system for top hammer

Robit® Single Casing Systems are available for traditional top hammer machinery.

Typically Robit® Single-Use system for Top Hammer is used in applications with relatively short hole requirement and where the casing is left in the ground.

Single-use system for down the hole hammer

Sometimes overburden is thick and full of boulders. Robit® Single-Use Casing System for DTH Hammer enables easy, fast, and reliable drilling process in all conditions. Robit® Single-Use Casing Systems are available for all the common Down The Hole hammers and are designed for all the applications where the casing is left in the ground.

Prime system for down the hole hammer

Robit® Prime ring bit product family makes it possible to pile both welded and threaded casing tubes using the same ring bit. Pile walls can also be made using the XL2 ring bit. With the Drill Through (DT) model, drilling can be continued with just the pilot.

• Suitable for different wall thicknesses, easy to align and weld
• Available with Flow Control rinsing
• With the Drill Through pilot bit, rock sockets can be drilled in a single work phase

Solitary ring system for down the hole hammer

DTH SR products are economical and cost-effective to use when the ground is homogenous with few small boulders. With the same pilot you can install piles and interlocked Pipe-Pile-Wall piles just by using ring bits with different outside diameters. Robit® Solitary Ring Casing Systems are available for all the common Down The Hole hammers and can be used for all applications where the casing is left in the ground.

Steel Fist system for down the hole hammer

Robit® Steel Fist product family is designed for specific piling operations, sizes from 273 mm up to 1220 mm. New economic way for traditional piling work, but also capable for installing water-proof Pipe-Pile-Walls. No ring bit is needed when piling with DTH SF. Usage in homogenous soil conditions with small boulders. Robit® Steel Fist Casing Systems are available for all the common Down The Hole hammers and can be used for all applications where the casing is left in the ground.

Non-Stop system for down the hole hammer

Robit® Non-Stop system is an advanced casing system that start to drill with a casing and then to continues beyond it without tool changes. No need to pull out the pilot bit and the drill string to replace it by a conventional down the hole bit. A single operation disconnects the pilot and the ring from the casing. The drilling can be continued free from the casing tube without losing the drilling diameter.

Multi-use system for down the hole hammer

In some overburden drilling applications the casing has to be removed from the ground. This sets higher requirements on the durability of the equipment. Double groove design* in the casing shoe and the best materials available guarantee that Robit® Multi-Use system does not fail even in the most difficult conditions. Robit® Multi-Use system is available for all the common DTH hammers.

Horizontal system for down the hole hammer

The loads in Horizontal Drilling that the casing system must endure are severely higher than in typical vertical drilling. Robit® has developed a system which is capable of handling even the toughest conditions.
The Robit® HZ -system consists three parts; pilot bit, ring bit assembly with the ring bit and protective layer and impact shoe. The pilot bits hits directly the casing via the welded casing shoe. This causes that all the efforts of pulling the tube is diverted to the impact shoe and not on the ring. The ring bit is rotated with the pilot bit. This system leads to a longer life time of the ring bit, better penetration during drilling and increased reliability to finish the hole on time and according to plans.

Rotary Drilling relies upon high rotational speeds and thrust without percussion to achievethe desired effect and outputs. In rotary drilling, the rock is made to fracture by means of a combination of “pull down” pressure on the bit and rotational power “torque”. Weight is applied to gouge, chip and grind the rock. Tricone rotary bits are sometimes a good alternative to a DTH hammer.
• Available in TCI (carbide buttons) and mill tooth configurations.